T series of steering gear box

T series gear steering box

 

T series of gear steering box overview:
Gear steering box and commutator, steering gear, is a kind of dynamic convey institutions, is a kind of reducer, have a wide range of applications in the field of industry. Steering box now has realized the standardization and diversification. Steering box can be positive and negative operation, low speed or high speed smooth transmission. Steering box when the ratio is 1:1, the horizontal axis input, the vertical axis output to slow down, the vertical axis input, transverse output growth.

Chassis structure: high rigidity FC - 25 cast iron casting;

Gear steering gear box: just 20 crmntih gears adopt high quality high purity alloy carburizing and quenching, and grinding;

Spindle: axial using alloy steel conditioning, hung heavy loading capacity;

Bearing: rolling cone bearings with heavy loading capacity,

The oil seal oil seal: double sealing lip, both the dust and oil proof ability;

Lubrication: proper lubricating oil use, can play to the efficiency of the box, and improve its working life.

Gear steering box of oil change period:
A, use 2 weeks early or 100-200 hours, is the friction consumption in the early stage, there may be a little metal friction between the powder consumption, please be sure to clean inside, and a new lubricating oil.

B, use for a long time, every six months to a year or 1000-2000 hours to replace a lubricating oil.
The installation of gear steering box:

A, steering box can only be installed on the flat, shock absorption, torsional support structure.

B, in any case, are not allowed to use a hammer to pulley, coupling, small gear or sprocket and type on the output shaft, and that this might damage the bearing axis.

Gear steering box use and maintenance:
A, steering box after installation, check whether the flexible. Please must be formally used for no-load test, in the case of normal operation, and loaded up gradually.

B, steering box is used by more than the rated load is strictly prohibited.

C, steering box before use and check the oil level is normal work.

The gear steering box structure, characteristics and response:

Chassis: high rigidity FC - 25 cast iron casting;

Gear, gear is made of high quality high purity alloy just 20 crmntih carburizing and quenching, and grinding;

Spindle: axial using alloy steel conditioning, hung heavy loading capacity;

Bearing: rolling cone bearings with heavy loading capacity,

The oil seal oil seal: double sealing lip, both the dust and oil proof ability;

Lubrication: proper lubricating oil use, can play to machine efficiency, and improve its working life.

A. the early use of 100-200 hours or two weeks, is the friction consumption in the early stage, there may be a little metal between the mo powder, please be sure to clean inside, and a new lubricating oil.

B. when used for a long time, every six months to a year or 1000-2000 hours to replace a lubricating oil.

Lubricating oil categories: this product by China petroleum lubricating oil full effect gear oil 90-90 degrees, low speed and light load conditions, the proposal USES full effect gear oil 90 degrees, the condition of heavy load, high temperature, recommended 120 degrees full effect gear oil.

Gear steering box technical parameters:
Can match single axis, double horizontal shaft, single longitudinal axis, double longitudinal axis

Speed ratio: 1 to 1, 1.5:1, 2-1, 2.5:1, 3:1

The torque range: 11.2-5713 - Nm

Power range: 0.014-335 kW

Basic models: T2 T4 T6 T7 has T8 T10 T12 T16 T20 T25

  • 上一篇:已经没有了
  • 下一篇:已经没有了
  • CONTACT US

    Contacts:Xiao total

    TEL:13676486610

    Call:86-577-67318634 67378102

    FAX:86-577-67318644

    Email:441952485@qq.com

    Address:Wenzhou city in zhejiang province OuBei Town horse openmindedness industrial zone openmindedness north road no. 57

    用手机扫描二维码关闭
    二维码